Standard Incubators
Memmert Forced Circulation Incubator
Memmert Forced Circulation Incubator IF 750 Plus, 115 volt, 50/60 Hz, maximum temperature range to 80C
Percival Scientific Biological Incubator, I66LLH6, 62.4 cu. ft., horizontal IncuWhite LED lighting, 4 tiers, pan-type humidifier, dehum. and adv. RH sensor, 4-44° C ±0.5°, IntellusUltra controller
The I66LLH6 incubator is frequently used for mosquitos, other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 120 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and adv. sensor tightly control humidity. Eight white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Percival Scientific Biological Incubator, I41LLH1, 37.2 cu. ft., horizontal IncuWhite LED lighting, 4 tiers, pan-type humidifier and electronic RH sensor, 4-44° C ±0.5°, IntellusUltra controller
The I41LLH1 incubator is frequently used for mosquitos and other insects, low light algae growth, or low cost seed germination. IncuWhite LEDs are dimmable between 5-100% output with up to 100 µmoles/m2/s irradiance @ 6” from the LEDs. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. A pan-type humidifier and standard humidity sensor provides additive humidity.Four white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Percival Scientific Biological Incubator, I30NLH6, 9.6 cu. ft., non-lighted, 3 tiers, pan-type humidifier, dehum. and advanced RH sensor, 2-44° C ±0.5°, IntellusUltra controller
The I30NLH6 incubator is frequently used for C. elegans, nematodes, yeast/fungi, insects, bacteria and BOD. Interior / exterior of smooth white galvanized steel with foamed-in-place non-CFC insulation and a stainless-steel floor for corrosion resistance. Pan-type humidifier, dehumidifier, and adv. sensor tightly control humidity. Three white epoxy coated steel wire shelves adjustable in ½” increments. Self-contained air-cooled condensing unit with hot gas bypass system for continuous compressor operation extends life, ensuring precise temperature control by alternately cycling refrigerant and hot gas to coil; this also prolongs life of compressor, and eliminates risk of ice build up in coil. Top mounted refrigeration system allows easy access for maintenance and cleaning. For additional options contact sales@percival-scientific.com for a free consultation.
Darwin Chambers Company Single Door Thermoelectric Incubator 21 cu. ft.
The TE030 is a 23.9 cubic feet single door laboratory incubator. Temperature range is 18°C to 50°C. This unit comes with 3 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Silver-colored, polyester-coated aluminum interior and stainless steel floor with coved corners. The TE series chambers offer thermoelectric cooling that provides a much more stable temperature control than other refrigeration systems. All the TE Series incubators incorporate inherent cooling redundancy, quiet operation, simple serviceability and excellent reliability.
Darwin Chambers Company Benchtop Thermoelectric Incubator 9 cu. ft
The TE011 is a 11.6 cubic feet benchtop laboratory incubator. Temperature range is 12°C to 50°C. This unit comes with 2 stainless steel shelves. The chamber provides 304 series stainless steel interior and door liner, corrosion-resistant; also a heavy-gauge powder-coated, galvanized steel exterior. The TE series chambers offer thermoelectric cooling that provides a much more stable temperature control than other refrigeration systems. All the TE Series incubators incorporate inherent cooling redundancy, quiet operation, simple serviceability and excellent reliability.
Darwin Chambers Company Single Door Thermoelectric Incubator 21 cu. ft.
The TE030-SS is a 23.9 cubic feet single door laboratory incubator. Temperature range is 18°C to 50°C. This unit comes with 3 epoxy coated shelves. Exterior is stainless Steel Front continuous coil coated sides with keyed lock. Stainless steel interior. The TE series chambers offer thermoelectric cooling that provides a much more stable temperature control than other refrigeration systems. All the TE Series incubators incorporate inherent cooling redundancy, quiet operation, simple serviceability and excellent reliability.
Med Vet International 3M Attest Biological Indicator Incubator, 116, Each
3M's Attest biological incubator is self-contained to minimize false positives and reduce the risk of contamination 14-vial capacity that is ideal for most office sizes The Attest biological indicator Incubator automatically crushes vials for safety and convenience Color-coded for simple use Dry-block design is preset to 50° C for more consistent and accurate results The translucent cover allows you to monitor the color change indicator
JDM LAB SOLUTIONS LLC AEOLUS™ Compact CO2 Incubator Shaker IS-AHC3SA/ IS-AH3GA, 3mm Orbit for Microplates
AEOLUS™ Compact CO2 Incubator Shaker IS-AHC3SA/ IS-AH3GA, 3mm Orbit for Microplates
Chemglass Life Sciences Incubator, MyTemp Mini with Heating, 120V
Incubator, MyTemp Mini with Heating, 120V.¿ Digital temperature control ¿ 13 x 14.5" footprint ¿ Accepts bottles and flasks up to 2L ¿ NEW Internal power outlet for installation of small shakers, mixers, etc.With digital temperature control, the MyTemp incubators provide convenient ¿Set and walk away¿ operation, eliminating the need for external thermometers and repetitive ¿fine tuning¿ of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel. Unique design accepts USA, EU, UK, and AU plugs.Despite a modest footprint of 14.5¿ x 13¿, the Benchmark MyTemp incubators feature large internal chambers, capable of storing flasks and bottles up to 2 liters. In addition, the incubators include two adjustable/removable shelves for increased capacity.Incubators are CE Approved.
Chemglass Life Sciences Incubator, 5.6 Cu. Ft., High Heat Decontamination, IR, Single Chamber, 120V
Anti-Corrosion Anode. Patented Copper-Housed HEPA Filter for Superior Contamination Prevention. Factory Pre-Set, Door Thermostat. Pre-Heated CO2 Gas Inlet for Increased Temperature Uniformity. Front-Mounted Connections for Convenience. Over Temperature and CO2 Alarms. Inner Glass Viewing Door. Stainless Steel Chamber and Autoclavable Door Gasket Make Cleaning Easy. 5-Year Limited Warranty. The CLS-2447 series of CO2 incubators offers dependable infrared (IR), CO2 sensor control and is ideal for QA / QC applications. The incubators include an anti-corrosion anode which allows the use of distilled or tap water in the compact water jacket. De-ionized water should not be used. Anti-contamination features make cleaning a breeze and the CO2 sample port is located on the front control panel for quick and easy access. Incubators have microprocessor controllers. The humidity level inside the chamber is maintained at approximately 95%.